Sunday, January 31, 2010

How To Repair A Bumper Gash Possible To Fix/cost Of Repairing Gash In Car Bumper?

Possible to fix/cost of repairing gash in car bumper? - how to repair a bumper gash

I fell into a jeep towing, while the brackets of the angle parking. He left a very deep scratches about 2 cm wide in the plastic molding on my bumper, around my back plate.

Can I repair this, and if so, how can I expect to pay up?

Thank you!

3 comments:

  1. If plastic is not as bad and bumpy, the form may be returned by heating and aligned with the edges of the wound can be repaired with 3M to 4240 Duramix Plastic Repair. Otherwise, you will meet new bumper. I would opt for the new bumper cover, because the manufacture, repair and paint the existing bumper probably cost about $ 250 and the price of a new bumper cover most vehicles generally cover less $ 200 (less $ 100) and the cost for paint and install it normally costs about $ 200 to $ 250 How will it cost to replace the bumper cover little more than the repair of the bumper cover for him.

    ReplyDelete
  2. When the plastic molding is removable and replaceable and contains 100% from scratch, you can buy a replacement and remove and replace the moldings. Molded parts can be expensive - $ 50 - $ 200 depending on the vehicle and the materials (rubber, aluminum trim, etc.)

    If the color of the front bumper, the bumper urethane and Bondo / fiberglass is not the proper way to repair. With a fixed rate of approximately U.S. $ 100 per hour that had allowed 1.5 hours to claim / the scratches with urethane urethane repair material for repairs and at least 1-2 hours a sand / paint protection preparedness. that runs $ 250 - at least $ 350 to repair.

    ReplyDelete
  3. Possibly with bondo or fiberglass ... will cost ... although at least 150 for all, probably. You can also simply a new bumper.

    ReplyDelete